175W 24V to 12V/24V Isolated Dual Output DC-DC Converter for AGV & AMR | MDB175-24D12&24
MDB175-24D12&24 175W Isolated Dual Output DC-DC Converter
Input: 24VDC System
Output 1: 12VDC / 6.25A
Output 2: 24VDC / 4.16A
Rated Power: 175W
Output Type: Isolated Dual Output
Application: AGV / AMR Control System Auxiliary Power
The MDB175-24D12&24 is a 175W isolated dual-output DC-DC converter designed for AGVs, AMRs, mobile robots and other battery-powered industrial equipment requiring both 12VDC and 24VDC auxiliary power.
It simultaneously provides 12VDC/6.25A and 24VDC/4.16A outputs, allowing one converter to support two auxiliary voltage domains within the same robotic platform.
The 12VDC/6.25A output can power industrial IPCs, communication gateways, cameras and auxiliary electronics, while the 24VDC/4.16A output can support controllers, Remote I/O modules, sensors and industrial communication devices.
Its galvanic isolation helps create an electrical boundary between the upstream battery/motor power domain and sensitive control electronics, reducing power-related interference in demanding mobile robotic environments.
By integrating two output rails into one module, the MDB175-24D12&24 also helps reduce separate converter count, wiring, connectors and installation space.
Key Features
175W isolated dual-output DC-DC converter
Designed for 24V battery-powered AGV/AMR systems
Output 1: 12VDC / 6.25A
Output 2: 24VDC / 4.16A
12V & 24V simultaneous auxiliary power
Input-to-output galvanic isolation
EMI/EMC-resistant power design
Suitable for vibration and continuous operation
Simplifies multi-voltage power architecture
Reduces converter count and wiring complexity
OEM/ODM customization available
Typical Applications
Automated Guided Vehicles (AGV)
Autonomous Mobile Robots (AMR)
Mobile Robots
Industrial IPCs
Communication Gateways
Robot Controllers
Remote I/O Modules
Industrial Cameras
Sensors
Mobile Robotic Control Systems
I. MODELS LIST
Single Channels Output
Model | Input Voltage (VDC) | Input Voltage Range (VDC) | Output voltage (VDC) | Output Current(A) | Output Power(W) | Ripple And Noise(mv) | Efficiency (Typ) |
MDB175-24D12&24 | 24VDC | 18-36VDC | 12&24VDC | 6.25&4.16A | 175W | 120&200 | 84% |
Only the typical models are listed. If you need another models, please inform the power,Input and output voltage,then feel free to call us.
II. FEATURES
1 | High and low voltage input for option |
2 | Good heat dissipation with beautiful appearance |
3 | Natural cooling |
Condition: All specifications are tested under the room temperature 25 ℃, Normal input voltage and Pure Negative Normal Load
III. INPUT CHARACTERISTIC
Rated value(VDC) | Voltage Range(VDC) |
24VDC | 18-36VDC |
IV. OUTPUT CHARACTERISTIC
Parameter | Value |
Power | 175W |
Output Voltage | 12&24VDC |
Output Current | 6.25&4.16A |
Line Regulation | ±0.5% |
Load Regulation | ±0.5% |
Voltage Set-point Accuracy | ±2% |
Output Current Limiting | 120%(Typ) |
V. PROTECTIVE CHARACTERISTIC
1 | Input under voltage protection |
2 | Input over voltage protection |
3 | Over temperature protection |
4 | Output over current protection |
5 | Output short circuit protection |
GENERAL CHARACTERISTIC
Parameter | Value |
Switching Frequency | 100-200KHz |
lsolation Resitstance | 200MΩ |
lsolation Voltage
Parameter | Value |
Input-Output | >1500VDC |
Input-Case | >1050VDC |
Output-Case | >500VDC |
Environmental Characteristics
Parameter | Value | |
Case Temperature | Industry | -25 – +85℃ |
Military l | -40 – +85℃ | |
Storage Temperature | Industry | -45 – +105℃ |
Military | -55 – +105℃ | |
VI. MECHANICAL DRAWING AND PIN DEFINITION
One Isolated Power Module for Both 12V and 24V AGV/AMR Loads
An AGV or AMR may use a 24V battery system, but that does not mean every onboard device can—or should—share the same power path directly.
Modern mobile robots combine motor drives, controllers, IPCs, communication gateways, cameras, Remote I/O and sensors within one compact platform.
These devices may require different auxiliary voltages and can also be sensitive to electrical disturbances generated by motors, switching loads and changing battery conditions.
The MDB175-24D12&24 provides a dedicated isolated dual-output power architecture:
12VDC / 6.25A for IPCs, gateways, cameras and auxiliary electronics.
24VDC / 4.16A for controllers, Remote I/O, sensors and industrial communication devices.
This allows engineers to supply two auxiliary voltage domains from one converter instead of installing separate power modules.
Typical Power Architecture
24V Battery / DC Bus
↓
MDB175-24D12&24 Isolated Dual-Output DC-DC Converter
↓
12VDC / 6.25A → IPC / Gateway / Camera / Communication
24VDC / 4.16A → Controller / Remote I/O / Sensors
What Does This Bring to Your AGV/AMR Design?
Using one isolated dual-output converter can help:
Supply 12V and 24V loads from one module
Reduce separate DC-DC converter count
Reduce wiring and connector complexity
Save installation space inside the robot
Simplify BOM and power distribution
Separate sensitive electronics from the upstream power domain
Reduce power-related controller resets
Improve communication and sensor stability
Simplify system troubleshooting
Accelerate AGV/AMR power integration
Why Choose MINGZINC?
MINGZINC develops industrial isolated DC-DC power solutions around actual system operating conditions rather than simply matching input voltage, output voltage and wattage.
For AGV, AMR and mobile robotic applications, our engineering approach considers:
Battery bus variations
Multi-voltage auxiliary loads
Motor-related electrical disturbances
Galvanic isolation
EMI/EMC environment
Output stability
Installation space
Vibration and continuous operation
Thermal management
For OEM/ODM projects, MINGZINC can also customize input/output parameters, single or dual outputs, interfaces, mounting structures and thermal solutions according to specific equipment requirements.
For Distributors & OEM Partners
For Power Supply Distributors, DC-DC Converter Suppliers, AGV/AMR Manufacturers, Robot System Integrators and Industrial Equipment OEMs, the MDB175-24D12&24 provides a practical way to expand an existing industrial power portfolio with an isolated 12V + 24V dual-output power solution.
MINGZINC supports OEM Power Supply, ODM Power Supply and Custom Power Supply development for different AGV, AMR and industrial robotic platforms.
Need a customized dual-output DC-DC converter for your AGV or AMR project? Contact MINGZINC for technical specifications, sample evaluation and OEM/ODM support.