150W 24V to 5V/24V Isolated Dual Output DC-DC Converter for Machine Vision | MDB150-24D05&24
MDB150-24D05&24 150W Isolated Dual Output DC-DC Converter
Input: 24VDC System
Output 1: 5VDC
Output 2: 24VDC
Rated Power: 150W
Output Type: Isolated Dual Output
Application: Industrial Machine Vision & Inspection Systems
The MDB150-24D05&24 is a 150W isolated dual-output DC-DC converter designed for machine vision, automated inspection and industrial imaging systems requiring both 5VDC and 24VDC auxiliary power.
Its dual-output architecture allows one converter to support two voltage domains within the same vision system.
The 5VDC output can supply embedded processing boards, logic circuits and interface electronics, while the 24VDC output can support industrial cameras, sensors, trigger devices and Remote I/O equipment.
Galvanic isolation helps create an electrical boundary between the upstream industrial power domain and sensitive vision electronics, reducing interference coupling in environments containing servo drives, motors, VFDs and other switching loads.
By integrating 5V and 24V outputs into one isolated module, the MDB150-24D05&24 helps reduce separate converters, wiring, installation space and system complexity.
Key Features
150W isolated dual-output DC-DC converter
24VDC system input
5VDC + 24VDC dual outputs
Input-to-output galvanic isolation
Designed for machine vision and inspection systems
Stable auxiliary power for sensitive electronics
EMI/EMC-resistant power design
Reduces separate power module count
Simplifies wiring and system integration
OEM/ODM customization available
Typical Applications
Machine Vision Systems
Automated Optical Inspection Equipment
Industrial Camera Systems
Image Processing Equipment
Embedded Vision Controllers
Industrial Sensors
Trigger Devices
Remote I/O Systems
Automated Inspection Machines
I. MODELS LIST
Single Channels Output
Model | Input Voltage (VDC) | Input Voltage Range (VDC) | Output voltage (VDC) | Output Current(A) | Output Power(W) | Ripple And Noise(mv) | Efficiency (Typ) |
MDB150-24D05&24 | 24VDC | 18-36VDC | 05&24VDC | 10&4.16A | 150W | 100&200 | 83% |
Only the typical models are listed. If you need another models, please inform the power,Input and output voltage,then feel free to call us.
II. FEATURES
1 | High and low voltage input for option |
2 | Good heat dissipation with beautiful appearance |
3 | Natural cooling |
Condition: All specifications are tested under the room temperature 25 ℃, Normal input voltage and Pure Negative Normal Load
III. INPUT CHARACTERISTIC
Rated value(VDC) | Voltage Range(VDC) |
24VDC | 18-36VDC |
IV. OUTPUT CHARACTERISTIC
Parameter | Value |
Power | 150W |
Output Voltage | 05&24VDC |
Output Current | 10&4.16A |
Line Regulation | ±0.5% |
Load Regulation | ±0.5% |
Voltage Set-point Accuracy | ±2% |
Output Current Limiting | 120%(Typ) |
V. PROTECTIVE CHARACTERISTIC
1 | Input under voltage protection |
2 | Input over voltage protection |
3 | Over temperature protection |
4 | Output over current protection |
5 | Output short circuit protection |
GENERAL CHARACTERISTIC
Parameter | Value |
Switching Frequency | 100-200KHz |
lsolation Resitstance | 200MΩ |
lsolation Voltage
Parameter | Value |
Input-Output | >1500VDC |
Input-Case | >1050VDC |
Output-Case | >500VDC |
Environmental Characteristics
Parameter | Value | |
Case Temperature | Industry | -25 – +85℃ |
Military l | -40 – +85℃ | |
Storage Temperature | Industry | -45 – +105℃ |
Military | -55 – +105℃ | |
VI. MECHANICAL DRAWING AND PIN DEFINITION
Integrated 5V & 24V Power for Machine Vision Systems
Machine vision systems often combine sensitive 5V processing electronics with 24V cameras, sensors and I/O devices.
The MDB150-24D05&24 integrates both voltage rails into one isolated 150W DC-DC power module, helping reduce converter count, wiring and installation space while creating a clearer power architecture.
Typical Power Architecture:
24VDC Industrial Bus
↓
MDB150-24D05&24 Isolated Dual-Output DC-DC Converter
↓
5VDC → Processing / Logic / Interface Electronics
24VDC → Camera / Sensor / Trigger / Remote I/O
Why MINGZINC?
MINGZINC develops application-oriented industrial isolated DC-DC power solutions for machine vision and automation equipment, with support for:
Custom input/output configurations
Single and dual-output designs
Galvanic isolation
EMI/EMC optimization
Interface and mounting customization
OEM/ODM engineering support
For Power Supply Distributors, DC-DC Converter Suppliers, Machine Vision Equipment Manufacturers, Automation System Integrators and Industrial Equipment OEMs, MDB150-24D05&24 provides a flexible dual-output power solution for machine vision applications.
Need a customized 5V + 24V isolated DC-DC solution? Contact MINGZINC for specifications, samples and OEM/ODM support.