MDE300-110S24 300W 110VDC to 24VDC Isolated Power Supply Module - Mingxin Technology
MDE300-110S24 300W 110VDC to 24VDC Isolated Power Supply Module - Mingxin Technology
I. Model
model | Input voltage (VDC) | Input voltage range (VDC) | Output voltage (VDC) | Output current (A) | Ripple (MV) | Efficiency (Typ) |
MDE300-110S24 | 110VDC | 66-154VDC | 24VDC | 12.5A | 200 | 89% |
II.characteristic
1 | High and low voltage input selectable |
3 | 2x, 4x voltage input |
4 | Easy to install |
5 | High efficiency |
6 | High reliability and long lifespan design |
Conditions: Unless otherwise specified, all parameters are tested under the following conditions: ambient temperature 25°C, nominal input voltage, and purely resistive nominal load.
IIIInput characteristics
Rated Value (VDC) | Voltage range (VDC) |
110 VDC | 66-154VDC |
IVOutput characteristics
power | 300W |
Output voltage | 24VDC |
Output current | 12.5A |
Voltage regulation (main circuit) | ±0.5% |
Load regulation (main route) | ±0.5% |
voltage accuracy | ±2% |
Current limiting point | 120%(Typ) |
V. Protective characteristics
1 | Input undervoltage protection |
2 | Output overvoltage protection |
3 | Over-temperature protection |
4 | Output overcurrent protection |
5 | Output short circuit protection |
General characteristics
Operating frequency | 100-200KHz |
Insulation resistance | 200MΩ |
Isolation voltage value
Input-Output | >1500VDC |
Input - Shell | >1050VDC |
Output - Housing | >500VDC |
Environmental Characteristics
Operating case temperature | (Industrial products) | -25 – +85℃ |
(Army I) | -40 – +85℃ | |
(Army II) | -55 – +85℃ | |
Storage temperature | (Industrial products) | -45 – +105℃ |
(Army I) | -55 – +105℃ |
VI.Outline dimensions and pin definitions
