MDF170-24D05&12 170W 24VDC to 05&12VDC Isolated Module Power Supply - Mingxin Technology
MDF170-24D05&12 170W 24VDC to 05&12VDC Isolated Module Power Supply - Mingxin Technology
I.model
Dual-path
model | Input voltage (VDC) | Input voltage range (VDC) | Output voltage (VDC) | Output current (A) | Ripple (MV) | Efficiency (Typ) |
MDF170-24D05&12 | 24VDC | 18-36VDC | 05&12VDC | 10A&10A | 80&120 | 84% |
IIFeatures
1 | High and low voltage input selectable |
2 | 2x, 4x voltage input |
3 | Easy to install |
4 | High efficiency |
5 | High reliability and long lifespan design |
6 | Multiple, independent outputs are available. |
Conditions: Unless otherwise specified, all parameters are tested under the following conditions: ambient temperature 25°C, nominal input voltage, and purely resistive nominal load.
IIIInput characteristics
Rated Value (VDC) | Voltage range (VDC) |
24 VDC | 18-36 VDC |
IVOutput characteristics
power | 170W |
Output voltage | 05&12VDC |
Output current | 10&10A |
Voltage regulation (main circuit) | ±0.5% |
Load regulation (main route) | ±0.5% |
voltage accuracy | ±2% |
Current limiting point | 120%(Typ) |
V. Protective characteristics
1 | Input undervoltage protection |
2 | Output overvoltage protection |
3 | Over-temperature protection |
4 | Output overcurrent protection |
5 | Output short circuit protection |
General characteristics
Operating frequency | 100-200KHz |
Insulation resistance | 200MΩ |
Isolation voltage value
Input-Output | >1500VDC |
Input - Shell | >1050VDC |
Output - Housing | >500VDC |
Environmental characteristics
Operating case temperature | industrial products | -25 – +85℃ |
Army I | -40 – +85℃ | |
Army II | -55 – +85℃ | |
Storage temperature | industrial products | -45 – +105℃ |
Army I | -55 – +105℃ |
WEExternal dimensions and pin definitions
