How to install the Saint Vincent and the Grenadines AC power supply so that it can function as a pro




input protection circuit
General module power products have built-in filters, which can meet the requirements of general power supply applications. If a more demanding power system is required, an input filter network should be added. An LC or π-type network can be used, but care should be taken to choose a smaller inductance and larger capacitance as much as possible.
In order to prevent the transient high voltage of the input power supply from damaging the power supply of the module, it is recommended that the user connect a transient absorption diode at the input end and use it with a fuse to ensure that the module is within a safe input voltage range. In order to reduce common-mode noise, Y (Cy) capacitors can be added, and a few nf high-frequency capacitors are generally selected. R is a fuse, D1 is a protection diode, and D2 is a transient absorption diode (P6KE series).


module power supply

Saint Vincent and the Grenadines The three-phase AC power intelligent protector has major electrical fault protection functions such as overvoltage, low voltage, neutral wire disconnection, short circuit, phase loss/opening, etc., and has fault identification, fault indication, voltage before closing, neutral live wire reverse connection, Zero line disconnection, phase loss/phase failure detection, remote monitoring, online parameter modification and software upgrade functions.

The three-phase AC power intelligent protector has developed and created the function of "fault detection before closing", which has greatly improved its performance and reliability. The three-phase AC power intelligent protector detects the  Marine boost voltage power supply voltage, the reverse connection of the neutral line, the disconnection of the neutral line, and the lack of phase/phase failure through the single-chip microcomputer before the main switch is closed.