MAB50-150W Series AC-DC Power Module - Mingxin Technology
I. Model
single path
model | Input voltage (Vac) | Input voltage range (Vac) | Output voltage (Vdc) | Output current (A) | Ripple PK-PK (mv) | Efficiency (Typ) |
MAB100-220S05 | 220VAC | 176-264 | 05VDC | 20A | 80 | 83% |
MAB125-220S12 | 220VAC | 176-264 | 12VDC | 10.4A | 120 | 84% |
MAB150-220S24 | 220VAC | 176-264 | 24VDC | 6.25A | 200 | 85% |
MAB150-220S28 | 220VAC | 176-264 | 28VDC | 5.36A | 280 | 85% |
MAB150-220S48 | 220VAC | 176-264 | 48VDC | 3.1A | 300 | 85% |
MAB100-220S05-K | 220VAC | 90-264 | 05VDC | 20A | 80 | 83% |
MAB125-220S12-K | 220VAC | 90-264 | 12VDC | 10.4A | 120 | 84% |
MAB150-220S24-K | 220VAC | 90-264 | 24VDC | 6.25A | 200 | 85% |
MAB150-220S28-K | 220VAC | 90-264 | 28VDC | 5.36A | 280 | 85% |
MAB150-220S48-K | 220VAC | 90-264 | 48VDC | 3.1A | 300 | 85% |
Dual-path
model | Input voltage (Vac) | Input voltage range (Vac) | Output voltage (Vdc) | Output current (A) | Ripple PK-PK (mv) | Efficiency (Typ) |
MAB100-220D05&12 | 220VAC | 176-264 | 05&12VDC | 10A&4A | 100&120 | 83% |
MAB120-220D05&24 | 220VAC | 176-264 | 05&24VDC | 4A&4A | 80&200 | 83% |
MAB150-220D12&24 | 220VAC | 176-264 | 12&24VDC | 6A & 3.25A | 120&200 | 84% |
MAB150-220D05&28 | 220VAC | 176-264 | 05&V28DC | 2A&5A | 50&280 | 83% |
II.characteristic
1 | Input wideband noise filtering |
2 | Input surge current suppression circuit |
3 | Compliant with UL1950 and IEC950 safety regulations |
4 | Beautiful design |
5 | Terminal block wiring method |
Unless otherwise specified, all parameters are tested under the following conditions: ambient temperature 25°C, nominal input voltage, and purely resistive nominal load.
IIIInput characteristics
Rated value | Voltage range (VAC) |
220 VAC | 176-264 VAC |
220VAC | 90-264VAC |
IVOutput characteristics
power | 50-150W |
Output voltage | 5-48VDC |
Output current | 3-20A |
Voltage regulation (main circuit) | ±0.5% |
Load regulation (main route) | ±0.5% |
voltage accuracy | ±2% |
Current limiting point | 120%(Typ) |
V. Protective characteristics
1 | Input undervoltage protection |
2 | Input overvoltage protection |
3 | Over-temperature protection |
4 | Output overcurrent protection |
5 | Output short circuit protection |
General characteristics
power frequency | 100-200KHz |
Insulation frequency | 200MΩ |
Isolation voltage value
Input-Output | >1500VAC/1 min leakage current <5mA |
Input - Shell | Leakage current >1500VAC/1 min <5mA |
Output - Housing | ＞500VDC/1 min |
Main road - secondary road | ＞500VDC/1 min |
Environmental characteristics
Operating case temperature | (Industrial products) | -25 – +85℃ |
(Army I) | -40 – +85℃ | |
(Army II) | -55 – +85℃ | |
Storage temperature | (Industrial products) | -45 – +105℃ |
(Army I) | -55 – +105℃ |
WEExternal dimensions and pin definitions
