MAA30-100W Series AC-DC Isolated Power Supply Module - Mingxin Technology
I. model
single path
model | Input voltage (VAC) | Input voltage range (VAC) | Output voltage (VDC) | Output current (A) | Ripple PK-PK (MV) | Efficiency (Typ) |
MAA75-220S05 | 220VAC | 176-264 | 05VDC | 15A | 80 | 83% |
MAA100-220S12 | 220VAC | 176-264 | 12VDC | 8.3A | 120 | 84% |
MAA100-220S24 | 220VAC | 176-264 | 24VDC | 4.16A | 200 | 85% |
MAA100-220S48 | 220VAC | 176-264 | 48VDC | 2A | 300 | 85% |
MAA75-220S05-K | 220VAC | 90-264 | 05VDC | 15A | 80 | 83% |
MAA100-220S12-K | 220VAC | 90-264 | 12VDC | 8.3A | 120 | 84% |
MAA100-220S24-K | 220VAC | 90-264 | 24VDC | 4.16A | 200 | 85% |
MAA100-220S48-K | 220VAC | 90-264 | 48VDC | 2A | 300 | 85% |
Dual-path
model | Input voltage (VAC) | Input voltage range (VAC) | Output voltage (VDC) | Output current (A) | Ripple PK-PK (MV) | Efficiency (Typ) |
MAA30-220D05&12 | 220VAC | 176-264 | 05&12VDC | 3A/1.25A | 50&120 | 83% |
MAA30-220D05&12-K | 220VAC | 90-264 | 05&12VDC | 3A/1.25A | 50&120 | 83% |
IIFeatures
1 | Input wideband noise filtering |
2 | Input surge current suppression circuit |
3 | Compliant with UL1950 and IEC950 safety regulations |
4 | Beautiful design |
5 | Terminal block wiring method |
Conditions: Unless otherwise specified, all parameters are tested under the following conditions: ambient temperature 25°C, nominal input voltage, and purely resistive nominal load.
IIIInput characteristics
Rated value | Voltage range (VAC) |
220 VAC | 176-264 VAC |
220VAC | 90-264VAC |
IVOutput characteristics
power | 30-100W |
Output voltage | 5-48VDC |
Output current | 2-15A |
Voltage regulation (main circuit) | ±0.5% |
Load regulation (main route) | ±0.5% |
voltage accuracy | ±2% |
Current limiting point | 120%(Typ) |
V. Protective characteristics
1 | Input undervoltage protection |
2 | Input overvoltage protection |
3 | Output short circuit protection |
4 | Over-temperature protection |
5 | Output overcurrent protection |
General characteristics
Operating frequency | 100-200KHz |
Insulation resistance | 200MΩ |
Isolation voltage value
Input-Output | >1500VAC/1 min Leakage current <5mA |
Input - Shell | >1500VAC/1 min leakage current <5mA |
Output - Housing | ＞500VDC/1 min |
Main road - secondary road | ＞500VDC/1 min |
Environmental characteristics
Operating case temperature | (Industrial products) | -25 – +85℃ |
(Army I) | -40 – +85℃ | |
(Army II) | -55 – +85℃ | |
Storage temperature | (Industrial products) | -45 – +105℃ |
(Army I) | -55 – +105℃ |
WEExternal dimensions and pin definitions
|
VIIReference image
|
