MDB150-24S12 150W Isolated Module Power Supply for Converting 24VDC to 12VDC - Mingxin Technology
MDB40-200WSeries DC-DC Isolated Power Supply Modules - Mingxin Technology
I. model
single path
model | Input voltage (VDC) | Input voltage range (VDC) | Output voltage (VDC) | Output current (A) | Ripple (MV) | Efficiency (Typ) |
MDB100-18S12 | 18VDC | 9-36VDC | 12VDC | 8.33A | 120 | 83% |
MDB100-18S24 | 18VDC | 9-36VDC | 24VDC | 4.16A | 200 | 84% |
MDB150-24S12 | 24VDC | 18-36VDC | 12VDC | 12.5A | 120 | 84% |
MDB150-24S24 | 24VDC | 18-36VDC | 24VDC | 6.25A | 200 | 86% |
MDB150-48S12 | 48VDC | 36-72VDC | 12VDC | 12.5A | 120 | 85% |
MDB200-48S24 | 48VDC | 36-72VDC | 24VDC | 6.25A | 200 | 86% |
MDB150-110S12 | 110VDC | 66-154VDC | 12VDC | 12.5A | 120 | 84% |
MDB200-110S24 | 110VDC | 66-154VDC | 24VDC | 8.33A | 200 | 86% |
MDB200-110S48 | 110VDC | 66-154VDC | 48VDC | 4.16A | 300 | 86% |
Dual-path
model | Input voltage (VDC) | Input voltage range (VDC) | Output voltage (VDC) | Output current (A) | Ripple (MV) | Efficiency (Typ) |
MDB150-24D12&24 | 24VDC | 18-36VDC | 12&24VDC | 4A&4.16A | 120&200 | 83% |
MDB150-24D05&24 | 24VDC | 18-36VDC | 05&24VDC | 10A&4.16 | 100&200 | 83% |
IIFeatures
1 | Can be used in solar photovoltaic |
2 | Aesthetically pleasing and with good heat dissipation. |
3 | High efficiency |
4 | Natural cooling |
5 | High and low voltage input selectable |
Conditions: Unless otherwise specified, all parameters are tested under the following conditions: ambient temperature 25°C, nominal input voltage, and purely resistive nominal load.
IIIInput characteristics
Rated Value (VDC) | Input range (VDC) |
12 VDC | 9-18 VDC |
24 VDC | 18-36 VDC |
48 VDC | 36-72 VDC |
110 VDC | 66-154 VDC |
18 VDC | 9-36 VDC |
IVOutput characteristics
power | 40-200W |
Output voltage | 5-48VDC |
Output current | 2-20A |
Output voltage adjustment range | ±10% |
Voltage regulation (main circuit) | ±0.5% |
Load regulation (main route) | ±0.5% |
voltage accuracy | ±2% |
Current limiting point | 120%(Typ) |
V. Protective Characteristic
1 | Input undervoltage protection |
2 | Input overvoltage protection |
3 | Over-temperature protection |
4 | Output overcurrent protection |
5 | Output short circuit protection |
General characteristics
Operating frequency | 100-200KHz |
Insulation resistance | 200MΩ |
Isolation voltage value
Input-Output | >1500VDC |
Input - Shell | >1050VDC |
Output - Housing | >500VDC |
Environmental characteristics
Operating case temperature | (Industrial products) | -25 – +85℃ |
(Army I) | -40 – +85℃ | |
(Army II) | -55 – +85℃ | |
Storage temperature | (Industrial products) | -45 – +105℃ |
(Army I) | -55 – +105℃ |
WEExternal dimensions and pin definitions
|
