MDA100 - 48S24 100W 48VDC to 24VDC Isolated Module Power Supply - Mingxin Technology
MDA30-100WSeries DC-DC Isolated Power Modules - Mingxin Technology
I. model
single path
Input voltage (VDC) | Input voltage range (VDC) | Output voltage (VDC) | Output current (A) | Ripple (MV) | Efficiency (Typ) | |
MDA75-18S12 | 18VDC | 9-36VDC | 12VDC | 6.25A | 120 | 83% |
MDA75-18S24 | 18VDC | 9-36VDC | 24VDC | 3.13A | 200 | 84% |
MDA100-24S12 | 24VDC | 18-36VDC | 12VDC | 8.33A | 120 | 84% |
MDA100-24S24 | 24VDC | 18-36VDC | 24VDC | 4.16A | 200 | 86% |
MDA100-48S12 | 48VDC | 36-72VDC | 12VDC | 8.33A | 120 | 85% |
MDA100-48S24 | 48VDC | 36-72VDC | 24VDC | 4.16A | 200 | 86% |
MDA100-110S12 | 110VDC | 66-154VDC | 12VDC | 8.33A | 120 | 84% |
MDA100-110S24 | 110VDC | 66-154VDC | 24VDC | 4.16A | 200 | 86% |
Dual-path
model | Input voltage (VDC) | Input voltage range (VDC) | Output voltage (VDC) | Output current (A) | Ripple (MV) | Efficiency (Typ) |
MDA75-24D05&12 | 24VDC | 18-36VDC | 05&12VDC | 3A&4A | 80&120 | 82% |
MDA75-48D12&24 | 48VDC | 36-72VDC | 12&24VDC | 1.5A & 2A | 120&200 | 83% |
II.characteristic
1 | Input π-type filter |
2 | High power density |
3 | 2x, 4x voltage input |
4 | High reliability and long lifespan design |
5 | Easy to install, dual-ended cable output |
6 | Beautiful appearance design |
Conditions: Unless otherwise specified, all parameters are tested under the following conditions: ambient temperature 25°C, nominal input voltage, and purely resistive nominal load.
IIIInput characteristics
Rated Value (VDC) | Voltage range (VDC) |
12 VDC | 9-18 VDC |
24 VDC | 18-36 VDC |
48 VDC | 36-72 VDC |
110 VDC | 66-154 VDC |
18 VDC | 9-36 VDC |
IVOutput characteristics
power | 30-100W |
Output voltage | 5-48VDC |
Output current | 2-10A |
Voltage regulation (main circuit) | ±0.5% |
Load regulation (main route) | ±0.5% |
voltage accuracy | ±2% |
Current limiting point | 120%(Typ) |
V. Protective characteristics
1 | Input undervoltage protection |
2 | Input overvoltage protection |
3 | Over-temperature protection |
4 | Output overcurrent protection |
5 | Output short circuit protection |
General characteristics
Operating frequency | 100-200KHz |
Insulation resistance | 200MΩ |
Isolation voltage value
Input-Output | >1500VDC |
Input - Shell | >1050VDC |
Output - Housing | >500VDC |
Environmental characteristics
Operating case temperature | (Industrial products) | -25 – +85℃ |
(Army I) | -40 – +85℃ | |
(Army II) | -55 – +85℃ | |
Storage temperature | (Industrial products) | -45 – +105℃ |
(Army I) | -55 – +105℃ |
WEExternal dimensions and pin definitions
