MDGD 10-40W DIN rail power moduleseries
I. model
single path
model | Input voltage (VDC) | Input voltage range (VDC) | Output voltage (VDC) | Output current (A) | Ripple (MV) |
MDGD15-700S5 | 700VDC | 100-1200VDC | 5VDC | 3000MA | 50 |
MDGD15-700S12 | 700VDC | 100-1200VDC | 12VDC | 1250MA | 100 |
MDGD15-700S24 | 700VDC | 100-1200VDC | 12VDC | 630MA | 100 |
MDGD20-900S05 | 900VDC | 300-1500VDC | 5VDC | 4000MA | 50 |
MDGD20-900S12 | 900VDC | 300-1500VDC | 12VDC | 1660MA | 100 |
MDGD20-900S24 | 900VDC | 300-1500VDC | 24VDC | 833MA | 200 |
MDGD30-24S24 | 24VDC | 18-36VDC | 24VDC | 1.25A | 200 |
MDGD30-110S24 | 110VDC | 66-154VDC | 24VDC | 1.25A | 200 |
II.characteristic
1 | 100% full load aging test |
2 | Input and output isolation |
3 | Input undervoltage protection, input reverse connection protection |
4 | Output overcurrent protection, output short circuit protection |
5 | Ultra-wide input voltage: 18-36/66-154/100-1200/300-1500VDC selectable |
6 | Short circuit protection self-recovery function |
7 | Low power consumption, high cost performance |
Conditions: Unless otherwise specified, all parameters are tested under the following conditions: ambient temperature 25°C, nominal input voltage, and purely resistive nominal load.
IIIInput characteristics
Rated Value (VDC) | Input voltage range (VDC) |
24VDC | 18-36VDC |
110VDC | 66-154VDC |
700VDC | 100-1200VDC |
900VDC | 300-150VDC |
IVOutput characteristics
power | 10-40W |
Output current | 0-5A |
Output voltage | 5-48VDC |
Output voltage adjustment range | ±10% |
voltage accuracy | ±2% |
Voltage regulation (main circuit) | ±0.5% |
Load regulation (main route) | ±0.5% |
Current limiting point | 120%(Typ) |
V. Protective characteristics
1 | Input undervoltage protection |
2 | Input overvoltage protection |
3 | Over-temperature protection |
4 | Output overcurrent protection |
5 | Output short circuit protection |
VI General Characteristics
Operating frequency | 100-200KHz |
Insulation resistance | 200MΩ |
VII Isolation Voltage Value
Input-Output | >1500VDC |
Input - Shell | >1050VDC |
Output - Housing | >500VDC |
VIII Environmental Characteristics
Operating case temperature | industrial products | -25 – +85℃ |
Military l | -40 – +85℃ | |
Army II | -55 – +85℃ | |
Storage temperature | industrial products | -45 – +105℃ |
Army I | -55 – +105℃ |
IX Form Factor and Pin Definitions
