MDGA 10-40W DIN rail power module
I. model
single path
model | Input voltage (VAC) | Input voltage range (VAC) | Output voltage (VDC) | Output current (A) | Ripple (MV) |
MDGA15-220S12 | 220VAC | 85-265VAC 165-265VAC 100-460VAC (Optional) | 12VDC | 1.25A | 120 |
MDGA20-220S24 | 220VAC | 24VDC | 0.83A | 200 | |
MDGA25-220S48 | 220VAC | 48VDC | 0.52A | 300 | |
MDGA40-220S15 | 220VAC | 15VDC | 2.66A | 120 |
IIFeatures
1 | 100% full load aging test |
2 | Input and output isolation |
3 | Temperature protection function |
4 | Long lifespan and high reliability |
5 | Ultra-wide input voltage: 85-265V/165-265V/100-460VAC optional |
6 | Short circuit protection self-recovery function |
7 | Low power consumption, high cost performance |
Conditions: Unless otherwise specified, all parameters are tested under the following conditions: ambient temperature 25°C, nominal input voltage, and purely resistive nominal load.
IIIInput characteristics
VAC rating | Input voltage range (VAC) |
220VAC | 85-265VAC |
220VAC | 165-265VAC |
220VAC | 100-460VAC |
IVOutput characteristics
power | 10-40W |
Output current | 0-5A |
Output voltage | 5-48VDC |
Output voltage adjustment range | ±10% |
voltage accuracy | ±2% |
Voltage regulation (main circuit) | ±0.5% |
Load regulation (main route) | ±0.5% |
Current limiting point | 120%(Typ) |
V. Protective characteristics
1 | Input undervoltage protection |
2 | Input overvoltage protection |
3 | Over-temperature protection |
4 | Output overcurrent protection |
5 | Output short circuit protection |
VI General Characteristics
Operating frequency | 100-200KHz |
Insulation resistance | 200MΩ |
VII. Isolation Voltage
Input-Output | >1500VDC |
Input - Shell | >1050VDC |
Output - Housing | >500VDC |
VIII Environmental Characteristics
Operating case temperature | industrial products | -25 – +85℃ |
Army I | -40 – +85℃ | |
Army II | -55 – +85℃ | |
Storage temperature | industrial products | -45 – +105℃ |
Army I | -55 – +105℃ |
IX. External Dimensions and Pin Definitions
